UNF Grade 5 High Tensile Hex Head Bolts & Nuts are supplied with a standard flat & spring washer. Bolts Only are supplied with a standard flat washer. The included washers are supplied at no extra cost. Supacheap Bolts Hexagon Head Grade 5 UNF High Tensile bolts are manufactured to Australian Standard 2465 and our bright zinc plated finish offers corrosion protection, suitable for general purpose internal and external higher strength bolting applications. Supacheap Bolts currently stock 1/4", 5/16", 3/8" and 7/16" diameter bolts up to 4" in length for certain diameters. Self colour or non plated types are now not commonly used, but are normally available but not carried in stock. Typical applications for this very widely used product include steel fabricators, machine builders, automotive applications and the mining and construction industry. Please note: Our Image is of a generic standard bolt and nut and thread lengths vary slightly per size so check with us before ordering if this dimension is of importance. Typically, thread lengths for our hex bolts will be to the recognised Australian or International standards. All bolt lengths are measured from under the head.